Workbench Storage Shelf

I laid out a line about 5" above the floor level on the legs and rails and used my 3/4" flat router bit to recess the 3/4" plywood shelf into.  My goal is to avoid having any unfinishes edges of this shelf.
Workbench Shelf
Workbench Shelf

I had a piece of scrap 3/4" plywood that was of sufficient size, but wasn't in too great of condition so I decided to go ahead and paint it.  Using the logic of a gloss finish making it easier to keep clean helped me jusify painting the wood.  Choose the color red (Illinois State University RED Color) as it was leftover from a previous project.






Return to Home Page